-
All the time Wi-Fi signal strength is shown like -1 dBm (excellent). This cannot be, because the Wi-Fi module is located at a distance from the router (5-10 meters). This signal strength is displayed …
-
When I try to use Home Assistant Discovery feature, I get this error in the log.
Chipset: BL602 (RGBCW Bulb)
Flags: 10, 37
Version: 1.15.633
1 drivers active (BP5758D), total 13
**To Reprodu…
ataa updated
6 months ago
-
It looks like the bl602 exclusively used sdu as an SDIO2 slave interface. However `bl616_sdu.c` in the SDK looks like a stub when compared with the [bl_iot_sdk_matter](https://github.com/bouffalolab/b…
-
The OpenBL602 image is too big to send OTA to the Sonoff B05-BL-A19 bulb.
First I am not even sure it can be upgraded using the OTA. The Sonoff website says it can but I haven't tried it since I ha…
-
Hi.
I purchased BHT-002-GCLW and I have a problem communicating with it.
```
tomik67@tomik67MINT ~ $ esptool -p /dev/ttyUSB0 -b 460800 read_flash 0x00000 0x100000 originalFirmware1M.bin
esptool.…
-
I want to detect/determine what software and version devices are running where possible.
There's quite a lot of device info/config that the device can report already; ie, MAC, IP, SSID, wifi channel,…
-
### Posting because I cannot find mention anywhere
I have seen that mono supports the RISC-V architecture but cannot find anything relating to .NET 5 support for RISC-V.
Are there any plans to sup…
-
Using [this svd](https://github.com/sipeed/bl602-pac/blob/main/soc602_reg.svd) and svd2rust version 0.31.2, 0.31.3, or 0.31.4 generates a PAC that fails to build.
0.31.1 and 0.30.3 do generate a PAC …
-
One user just made my realize that our IRLibrary is an older version and Tasmota has newer.
@btsimonh , are you aware about that? Would you be able to update it?
For example, MITSUBISHI_AC is missin…
-
Subscribe to this issue and stay notified about new [daily trending repos in c](https://github.com/trending/c?since=daily).