-
Firstly Thank you for your project
I want to ask you in we can make something similar for burn boostloader from arduino ide.
Thank you
-
Hi Team,
I am working on PIC32MK1024GPK1024 MCU and bootloader_apps_usb H3 demo.
When building application and bootloader (Loadable Project ) for **Release** Mode Works fine but got below error in…
-
WoA (Windows on ARM) platforms use UEFI+ACPI for booting Windows, however on Qualcomm-bssed platforms the ACPI tables were found to be not suitable for Linux because of the heave PEP usage. For those …
-
Is there any way to burn the arduino bootloader on a blank ASR6501?
-
Hello,
i have a Cricut Maker Champagne.
My Cricut Maker has a different mainboard and a different chip. Your actual bootloader is not working with it.
I attached my chip and mainboard.
MK10…
-
Hi, Thanks for sharing this bootloader + firmware. I have an SKR-2 which should use the same bootloader. Where did you get the source for the bootloader? Would you mind adding it to this repo?
Than…
-
@YuraYelisieiev commented on Jul 18
In general:
- ~~We need to get rid of the static asserts in files. For example in storage.c.~~ (no, see [comments below](https://github.com/skycoin/hardware-w…
-
Hi zevero,
I have been working on a project and would like to be able to flash my 1284P from SD card for updates, I have loaded your avr_boot, firstly i am unable to select standard pinout as it wi…
-
```
MTK Flash/Exploit Client Public V2.0.1 (c) B.Kerler 2018-2024
Preloader - Status: Waiting for PreLoader VCOM, please reconnect mobile to brom mode
Port - Hint:
Power off the phone before…
-
When i run build in the new version, the build now gets put into build/circuitdojo_feather_nrf9160_ns, but it doesnt seem that the load via bootloader command actually reads this dir - Instead, it jus…