-
**Host OS:** macOS Ventura 13.4
**Compiler:** AppleClang 14.0.3
The build process fails at pi2_bpsk.cc due to
>error: implicit conversion from '_Complex double' to 'float' is not permitted in …
-
-
In [`dea97e9`](https://github.com/pemkotbekasi/website-status/commit/dea97e903e2cb2db17358f976bfc459c1cb8978e
), bpsk (https://bpsk.bekasikota.go.id) was **down**:
- HTTP code: 0
- Response time: 0 ms…
-
Hello. When I try to run (on Ubuntu) the official example project uhd_packet_tx.grc which depends on packet_tx.grc, I get the following python error:
> Warning: failed to XInitThreads()
Traceback …
-
This behavior isn't new and I have been scratching me head about this multiple times.
Lets start with some context:
gr-satellites is used with the satnogs integration that is created by @kng. Th…
-
Hello, I have a new problem.I used two antennas as the transmitter and one antenna as the receiver to verify only the communication function. Set related parameters as follows:
_Sampl…
-
Hi Bastian,
I have installed the gr-ieee802-11 module and run the wifi_loopback.grc which is working fine. As I have installed your tool now, I wanted to check if I can get Channel State Informatio…
sayaz updated
7 months ago
-
**Description of the issue**
After the initial installation,the SatDump v1.1.4 were no response when loading TLEs.
**Hardware (SDR/PC/OS)**
SDRPlay RSP1,i3-4170 16GB RAM,Windows 11 professional x64…
-
I noticed that the code directly divides the float type data into two parts in the modulation step before passing through the channel, and uses the second part as the imaginary part to simulate the mo…
-
Question:
Is it possible to implement support for lower sampling rates? When running the driver in SatNOGS it seams that the Raspberry 3 has problem handling samplings rate at 3e6, I get a lot of lo…