-
timestamps of eeg recording need to be very precise, ideally with an accuracy of a few milliseconds, or at least a known offset. Sending triggers from the software to the hardware is an easy solution…
-
I noticed that timestamps is drifting apart in a multi device configuration with sync. cables, one primary, and 1-8 subordinates. I had to detect my self when they drift beond the point where they no …
-
### Failing/Disabled Tests
- [ ] `aes_dma`: unimplemented for S2
- [ ] `dma_mem2mem`: S2
- [ ] `embassy_interrupt_spi_dma`: C2, C3, C6, H2 - need to use a different DMA-enabled peripheral
- [ ] …
-
Problem: The SpacecraftClock and PositionSensor for the Rover can get out of sync ( a minute apart or more ).
Cause: The SpacecraftClock and PositionSensors run on separate threads and get kicked o…
-
It appears that `pybind11_abseil` uses deprecated types. ie. `Breakdown`, `From_Datetime`. Will/when will this be updated?
These issues seem to appear even when using the `20230802.0` tag of abseil…
-
Windows and Linux both provide methods for retrieving the timestamp at which a packet was received by the system, which is pretty handy for anything involving clock synchronization or RTT calculation.…
-
It takes a very long time for systemd-timesyncd to update the system time.
During that time, its not possible to download any maps etc, via xcsoar filemanager due to the fact that the ssl certifica…
-
Currently, Helio does not offer any way I am aware of to sync clocks with other applications or hardware. There are a number of protocols that exist for syncing clocks between applications that Helio…
-
Hi,
I am new to RPI and the PTP concept.
1) First I would like to ask what hardware do we require to generate a PPS pulse in the GPIO of the RPI and how to transfer it to data acquisition board (fo…
-
Hello, I am using the BladeRF blocks in Gnu Radio 3.10.1.1. I am using multiple bladeRF 2.0 Micro xA4.
These blocks allow a lot of things that are not possible with Osmocom or Soapy blocks, one of th…