-
I downloaded the project "GRBL_LM4F120H5QR" from https://github.com/Smitter/GRBL_LM4F120H5QR.
I have modified it for the TI Stellaris Launchpad TM4C123gxl a US$12.99 board with an 80MHz ARM M4 Cortex …
Moffy updated
9 years ago
-
Per https://community.platformio.org/t/where-are-all-the-new-stm32-boards/23304.
Platform-STSTM32 should support all the boards which are selectible with that core in the Arduino IDE, too.
Exam…
-
# TL;DR
`px4_breaktrace` does not continue to run after `break` despite `continue`
The MCU halts forever and thus only one function call is sampled.
# What?
I want to create a callgraph for some…
-
## Reproduce steps:
1. Install pyOCD package
2. Run server with command "sudo pyocd-gdbserver -p 3333" for instance
## Expected result:
No crash
## Actual result:
Crash almost immediately.
…
-
The DFP packs works well with keil, but use pyocd it report no identifiable boot memory.
Looks pyocd cannot recognize the flash algo as flash memory.
Device family definition in DFP pack:
```xml
…
-
There's no available hardware yet AFAICT, but ST have published Linux kernel support about this device and there's some info online. So it's a [simpler MPU](https://trustedfirmware-a.readthedocs.io/en…
-
Hi, I have another issue regarding the IMXRT1176 :smile:
I'm trying to experiment with both the builtin target and the cmsis pack one. The builtin targets allow to debug only one core at a time, s…
-
I had some code that resembled this:
```rust
for smnum in 0..STRAND_COUNT {
// irrelevant stuff omitted
p.DMA.ch[smnum].ch_al1_ctrl.write(|w| unsafe {
…
-
I'm getting the error 'No cores were discovered'. This happens after successfully flashing a valid program.
If I erase the chip (using MCUXpresso, the official IDE for LPC845), the pyocd is able to d…
-
Dear Michał and atsams-rs Team,
Many thanks for crediting me in the latest newsletter, despite my humble contribution ! :sweat_smile:
As I am about to dig a bit more this SAM platform for both …