-
Device: HPE 5130 EI Switch use Comware 7
login prompt string change from `/^Username:$/` to `/^login:$/`
in cfg.
```
cfg :telnet do
username /^Username:$/
password /^Password:$/
end…
-
Hello,
I have a script that uses Netmiko to connect to multiple switches and create VLANs, then Tag some ports.
I was able run it successfully but it stopped at about 3/4th of the script. Here's…
Noct3 updated
5 years ago
-
using Netmiko 2.4.1
Connecting to HPE Comware switch. I'm trying to run a command that will send file from switch to FTP server but with debugging enabled I see that just on connect netmiko is intero…
-
Hello,
First of all, I am by no mean a python expert. This literally my first attemp at a script using netmiko.
I am trying to write a script that will connect to HP switches that are more orien…
Noct3 updated
5 years ago
-
?
User view commands:
cfd Connectivity fault detection (IEEE 802.1ag)
cluster Run cluster command
display Display current system information
ping Ping function
quit Ex…
-
##### SUMMARY
If I run a successful command using the raw module, then run an incorrect command any subsequent commands are corrupted for a period of time.
In the example below I have ru…
-
Hi,
Oxidized does not work for 3com comware v3 and H3C comware v5.
It is exactly the same error.
These 3com does not have any command named 'screen-length disable'.
The only way to get that …
-
Hi Team,
I added router "teltonika" which is based on OpenWRT. It' backing up perfectly, but problem is that this backup is way too big, as it's grabbing whole system not settings/config of router …
-
Hi,
We have setup a Metal LB configuration that is using L2 with the expected IP range for the Services of 10.120.50.32 -- 10.120.50.46. The K8S host nodes are in a subnet of 10.120.52.0/24. When w…
-
##### Issue Type:
Bug Report.
##### Ansible Version:
ansible 1.6 (devel 5ce6c86) last updated 2014/04/09 10:28:19 (GMT +200)
##### Environment:
Debian Wheezy (but most probably general problem).
##…