-
Hi,
I noticed that in README.md of mynewt-timescale-lib, the performance of 1s CCP is ~500ps.
Got a few questions regarding the performance of CCP/WCS
- How is this measured? Is there a way to r…
-
Hello.
I want to improve your library for my goal. I'm searching about a way to implement sending Rang to Tag side.
in this method A tag side can print its Rang from each anchor that it blinks with.…
-
Hi everyone,
Im using DWM1001-DEV with MyNewt OS. Some sample codes don’t work but some are working. When I looked at the decawave core bsp codes I thought it was not complete. am i right ? if im r…
-
Hello, I just got two decawave dw1000's working with 2 Arduino Uno's (without using the adapter board), and they can successfully transmit and receive data.
Unfortunately, the transmissions contain …
-
I have run example code BasicSender in Arduino Mega 2560 R3. The output from Serial Monitor is as follows:
```
### DW1000-arduino-sender-test ###
DW1000 initialized ...
Committed configuration ...
De…
-
I would like to use GPIO10 for an extra LED but I can't set it high to light the led.
Is there any issue in the module in this pin?
I have tested all pins and The only which fails are GPIO9, GPIO10 …
-
Sorry to open an issue to ask this question.
Recently I work on a project about indoor-location using DW1000, like your LOCO system (https://github.com/bitcraze/lps-node-firmware).
And i wonder why …
dusz7 updated
5 years ago
-
I was able to manage 2 Anchors and 1 Tag using the sample code DW1000_RangingTag/Anchor.
The tag printout the distance compared to each Anchors.
But when I power-on a third Anchor, I have an issue…
ghost updated
5 years ago
-
The measured distance value is usually too large. To get a more accurate result, a bias needs to be applied. Strictly speaking, the value of this bias depends on the received signal strength. For the …
-
Hi,
Using this code can you send custom data (other than position) using UWB from tag to the listener?
afnan updated
5 years ago