-
### Describe the bug
In the LAN DHCP Advanced Options table, the New UI allows the "Always" checkbox to be checked even though no tag has been selected to restrict the applicability of that option. W…
-
When I run dhcp_test, my dhcp server always receive two dhcp REQUEST packets before dhcp DISCOVER, dose it means that we shoud consider that case and do nothing before a valid dhcp DISCOVER? or there …
-
Hardware: GL.iNet GL-AR150
Gargoyle: 1.12.0 (recently upgraded to 1.14)
Any power cut results in DHCP no longer working after restart.
I suspect stale/corrupt DHCP leases. Depending on the device…
-
### Prerequisites
- [X] I have checked the [Wiki](https://github.com/AdguardTeam/AdGuardHome/wiki) and [Discussions](https://github.com/AdguardTeam/AdGuardHome/discussions) and found no answer
-…
-
Submitted by jensthebrain on 2011-04-04 13:54:08
check-dhcp uses an ip address from the host as source address for dhcp requests instead of 0.0.0.0
These dhcp packets get filtered by reverse path che…
-
Implement DHCP collector.
-
> How could one use DHCP for 16 arduinos? should one? So far I've tried static IP.
I need to investigate this further to see whether the device's static IP is honored in a truly DHCP setup, or if t…
-
How must i configure the DHCP-Server that Clients boot CoreOS?
I think nex-server is the IP of the coreos-ipxe-server and image?
i tried coreos_production_pxe.vmlinuz but id didn't work.
it would b…
-
### Describe the bug
Router is working with Openwrt 23.05.5 .
With last snaphot kernel ( 6.6.58 ) or a little older 6.6.33 , wan port does not work .
Can not get a dhcp address ! and if i set…
-
When the DHCP value changes, we receive a RTM_DELROUTE message from rtnetlink, prompting us to delete the default gateway. If the interface is not connected to a DHCP server, it will become unreachabl…