-
A permanent connect `ilink13` should reconnect if the network or far end node goes down and recovers. Below shows a reconnect attempting but failing. This issue is easily reproduced by disconnecting a…
-
I installed this on 2 nodes. 1st node seems fine. the 2nd node i get thos in the log" WARNING[4030] file.c: Unable to open /usr/local/bin/SkywarnPlus/SOUNDS/wx-tail (format 0x4 (ulaw)): No such file o…
-
Hello g4klx,
May I trouble you to modify the address and description of P25 reflector TG#52072 as follow:
P25 TG Number : 52072
Description : # Phuket P25 FreeDMREcholink
Address: 203.170.…
-
I installed the new version 1_7_99_72, but at launch this error comes out, which seems to be related to the events.tcl file.
I can't find where the missing parenthesis should be put .....
In previou…
-
#### Brief summary of issue
- When using `echoLink`, the links are only correct up to the 2000th link counting backwards. Clicking on any link further back than that executes the `command` in link #…
-
With recent versions of the client software (e.g. v1.7.99.68/69), there is no reconnection to the reflector server after an IP failure, if the IP address is entered for HOSTS instead of the hostname. …
-
Hi,
I am unable to connect to Echolink nodes. I am getting a segmentation fault and then SVXlink terminates. When I restart SVXlink, it gives me a Seg Fault error 2 to 3 more times, then on the fou…
-
Connect attempts to another node or from another node fail. It appears that /var/lib/asterisk/rpt_extnodes (aka the nodes list) is being incorrectly parsed. Inbound connect attempts show the node numb…
-
It will be nice to have via event sources access to svxreflector list of joined nodes similar like in echolink module list of echolink nodes in procedure client_list_changed . I thing that we are need…
-
hello again, hope not to disturb. I loaded the last update and I found that it does not recognize the sensor, the probe takes 15 seconds to start, it takes 35 seconds, and it does not throw the sensor…