-
Hi @knolleary ,
The following function
`pubsubclient.connect(clientId.c_str(),mqtt_username,mqtt_password);`
blocks the program for few seconds( atleast 5seconds in my program) and then says mq…
-
tes
**Describe the problem you have/What new integration you would like**
Support for local control of Tesla vehicle. Send commands to the car (i.e unlock/lock, start charge, set charge amps).
…
-
Hello,
I am running S2 Mini board (but tried with WROOM-32 and it was the same) and from time to time the board goes offline and after a while it reboots. Here is the log from the WEB GUI:
[17:36:…
-
### The problem
When using the function of adding the last 3 bytes of the Mac address to the device name, an error occurs.
The last 3 bytes of the MAC address are 71:05:2B, but the following is ad…
-
Home Assistant:
Core 2024.1.6, Supervisor 2023.12.1, Operating System 11.4, Frontend 20240104.0
Arduion IDE MacOS:
Version: 2.2.1, Date: 2023-08-31T13:53:43.373Z (5 months ago), CLI Version: 0.34…
-
### Basic Infos
#### Hardware
**WiFimanager Branch/Release:**
- [ ] Master
- [X] Development (OTA)
**Esp8266/Esp32:**
- [X] ESP8266
- [ ] ESP32
**Hardware: ESP-12e, esp01, esp25**
- […
zen85 updated
2 years ago
-
Hi.
Using Arduino MEGA, ESP-12-F, NodeHAP-JS and Mosca.
Publisher and Client successfully connecting and subscribing to topic.
When I'm publishing from server (switching on and off in Home app) i…
-
Hi,
I have the following problem:
I can flash my ESP and connect to it’s AP. However, when i set up my network settings with fixed IP, the ESP show up in my WiFi network with a DHCP IP-Adress, but I…
-
Hello!
We discussed an ability to monitor several battery banks via rs-232 in Seplos project but stucked so I decided to try another approach. I bought a device:
![telegram-cloud-photo-size-2-53…
-
Steps to Reproduce:
1. Open the garage door. Notice that the light on the GDO turns on, and the light entity in Home Assistant reflects this.
2. Use the Home Assistant entity to turn off the light. …