-
**Is your feature request related to a problem? Please describe.**
A feature aimed at addressing the challenge of over-extrusion in small areas of solid infill, an issue previously not well understoo…
-
I think that the mass flow rates in the `singlezone_commercial_hydronic` testcase should be revised.
We have unsuccessfully tried to do an identification in this model, and the main issue we saw i…
-
## Invalid program state
One of Blockly's principles is that any connected group of blocks is a valid program. Not necessarily a _correct_ program, but one which could compiled to syntactically va…
-
As discussed in the past, it is possible to model static pipe behavior within a model structure similar to the newly developed pipe model. This needs 2 changes
- change heat loss model to calculate…
-
IMPORTANT: This section is meant for bug reporting only. For usage issues, please go to the [Support Forums](https://sourceforge.net/p/dwsim/discussion/).
**Describe the bug**
Overall, the valve c…
-
Based on the Local installation guide for Linux-Ubuntu 22.04, I successfully installed warpfusion and ran run_linux.sh. The GPU used is Tesla T4.
When I opened stable_warpfusion.0.20.ipynb in Colab…
-
would be nice for the `visNetwork` graphic to read the flow type from `sir$flows()` and generate an edge label with the _full_ flow.
for instance, for the sample SIR model, we have
```
sir$flo…
-
# Task Description
[WebArena](https://webarena.dev/) is a standalone, self-hostable web environment designed for building autonomous agents. It creates websites from four popular categories with func…
-
I want to model a serial action which can crash. Heres an example
```
fair action DoWork:
if current_state == State.Start:
lock_service.acquire_lock()
do_something
…
-
Currently it takes quite a bit of codebase knowledge to implement the point-and-click UX for new modeling operations (ex. Extrude, Revolve, Fillet) and sketching tools (ex. Rectangle, Circle, Arc) in …