-
Hier die ersten Auffälligkeiten beim Test des Octopus Boards in Zusammenhang mit der Universal Config
- [ ] "neue" Mesh-Methode deaktivieren
- [ ] probe speed von 1.0 auf 5.0 stellen
- [ ] probe sa…
OXERY updated
3 years ago
-
Hello,
I'm getting the following error on fluiddpi :
```Endstop and stepper must be on the same mcu```
My config for my ender 3 with the hermit crab canbus on usb :
```
# This file conta…
-
## Affected Version(s):
(The versions of fluidd this issue occurs on.)
- klipper version: v0.9.1-591-g43057895
- moonraker version: v0.9.1-591-g43057895
- fluidd version: v1.15.0
## Platform:
…
-
Hello,
during printing I recently get the error "**MCU 'mcu' shutdown: No next step** - _This is generally indicative of an intermittent communication failure between micro-controller and host._" m…
-
Output below. Adding "--use-deprecated=html5lib" to install-moonraker.sh produces this output:
```
###### Removing old virtualenv
Already using interpreter /usr/bin/python3
Using base prefix '/u…
-
Unable to get klipperScreen to start. WaveShare 5" Touchscreen. RPi 3B+ Ran through the troubleshooting steps. All are set as laid out in there. Still no luck. I just see the console screen on the dis…
-
Greetings,
I've concluded most of my ERCF build but I'm now struggling with the **ERCF_CALIBRATE** process on page 116 of the [Build Manual](https://github.com/EtteGit/EnragedRabbitProject/raw/main…
-
I was looking for where the problem with the thumbnail is and why they don't appear, after a long time I discovered this.
There is no option to search for thumbnails in the "metadata.py" configuratio…
-
How about a default printer.cfg in fluiddpi? That way I can edit it with the tools already in fluidd. Small concern of course since fluiddpi does 99% of the work the user, but on first install I assum…
-
moonraker is unable to process github api rate limit request. I've manually updated moonraker (with env rebuild) but the errors is still there. curl to https://api.github.com/rate_limit from the same …