-
Request support new algorithm in Marlin.
Extruding without the E or A axis. The velocity of the extruder is linked with the velocity of the nozzle.
Width of the line (perimeter/infill) and height of t…
-
When I print using the development branch (1938, 2474, and 2513), I find that all three of my printers vibrate like crazy. Marlin seems to either be stopping completely at the end of each segment, or…
-
Hi @ArcEye , would you like to join the development of [github.com/koppi/gcoder](https://github.com/koppi/gcoder/)?
Here's a quick video demo: https://www.youtube.com/watch?v=9D3hMXP5-QM
koppi updated
2 years ago
-
Hi,
This looks very interesting! Is python3 support planned?
Thanks,
Jeremy
-
It would be nice if heater commands set/temp/wait´like M109/M190 could be interruptable.
If wrong parameters sent or hw errors, Marlin would hang infinitely.
Somehow it would be nice if these command…
-
I've upgraded to RC4 and I'm getting instant crash:
- Browsing SD card works fine
- As soon as a file is selected, immediate crash, LCD goes blank and after a short while the startup message is shown
…
-
I am using a radxa zero SBC with 2GB of ram and a 4-core CPU connected to a prusa MK3S+ via the RPI0 port on the mainboard. I have a 1080p usb-c webcam, which the radxa zero should have more than enou…
-
Hi,
Have been looking at how to add mightyboard support recently, as have got access to a Replicator clone - however have run into several issues. Main one is, there is no support for MCP4018 I2C dig…
-
I'm creating this issue to track work on the `state-tags-master` branch (originally [introduced](https://sourceforge.net/p/emc/mailman/message/33300348/) on emc-developers), with the goal of acceptanc…
-
I just would want to modify the bed_mesh.py in order to follow a spiral pattern from the center of the bed plate instead of the zig zag one.
(As the homing point, in my case, is the center of the be…