-
In the KicadFiles/InkShield, the outline file is missing from the gerber files. For example, when uploading to OSH Park to replicate the board, it reports an error saying there is no outline found. Th…
-
The code:
```
import gerber
top_copper = gerber.read(r'D:\Reports\combined.gtl')
```
Produces error:
```
ValueError Traceback (most recent call last)
in
---…
-
I tried to use default generated Gerbers from Ki Cad 8, but I get only output panel with drills and no other information.
I need to switch to old Protel format in order to get all layers recognized b…
-
There is s problem with the way Fritzing generates gerber files for some components.
Rather than smooth lines, the pads of some components are constructed with lots of little steps. The issue can be…
-
I am in the process of developing flex PCBs. JLC requires a dedicated layer for outlining the Stainless Steel stiffener with the specs included in the zipped gerber. My current work-around is to draw …
-
Boards designed in Altium 20.
Gerber for individual board shows all drills. Panelized gerber missing one drill.
Gerber for individual board and panel attached. Screenshot shows missing drill.
[…
-
thank you Fabio for your fantastic project. I would like to ask you if it is possible to have the gerber files of the FABGL card compatible with Z80-MBCx and 68K cards.
-
I've built the cartridge according to the scheme, using a pcb made, thanks to the gerber present in the repository, by jlcpcb.
I copied the .uf2 file taken from the latest release on the raspberry pi…
-
Any chance you can update the gerber with BOM and CPL file(Component Placement List / Pick & Place File (PNP) file), it is used by automated SMT Assembly machines to determine where each part should b…
-
Hi Quinie,
I've built a version of your module a while back (pcbs version 3) and it seemed to work fine.
Now, with the same PCBs I had left over, I built two more, but they seem to be both having …