-
Hi all,
After some help if I can. Been using GivTCP for months now with no issues. Suddenly the other day i'm getting the following error
`2024-05-08 21:14:36,099 - read - [ERROR] - inverter Upd…
-
Some users would like charts in battery % rather than kWh
-
I have a 5.2 and a 9.5 battery on separate inverters.
Noticed today that the 9.5 battery (recenty replaced) is showing as 6.4 capacity, but all the HA metrics I look at give the correct capacity,…
gcoan updated
4 months ago
-
HI Wonder if you can help im new to HA and im running 2.4.3
its the correct invertor IP and have only have the 1 so set all the other batts to zero like other posts have said
2024-04-04 15:45:…
-
**Describe the bug**
Predbat typically comes up with a plan to discharge my batteries down to 2.0kWh (c. 10-11%) immediately before the IO window starts. The plan is always fine during the day.
…
-
**Describe the bug**
Spotted that my battery was not charging, despite Predbat planning to do so. Looking at the logs I can see Predbat switches :
2024-05-12 13:01:36.183835 INFO pred_bat: Inverter…
-
### The problem
Trying to add utility helpers. Some of them are added fine (UOM kWh is added after creation), but some do not pick up any UOM at all.
I can see this was fixed here but doesn't appe…
-
**Describe the bug**
Predbat shows the battery as 'discharging'. However, in the GivEnergy dashboard it shows the battery as idle and the house as running off the grid.
Read Only mode disabled, pr…
-
**Describe the bug**
I’ve integrated our Sunsynk inverter based on the advise for “other inverters”. Charge and discharge work fine
So I’ve probably missed something in how we get the battery to…
-
**Is your feature request related to a problem? Please describe.**
Support for multi-inverters controlled by the offical GE EMC module
**Describe the solution you'd like**
Integration into Predba…