-
Hi Aircoookie,
I've attached an RGBW LED strip to WLED on an H801 Wifi RGBWW controller that works just fine.
However, when controlling the color with Alexa and the Hue emulation, the white chan…
-
When applying the h801 [template](https://blakadder.github.io/templates/h801.html), the web interface (and reported auto-config) does not seem to contain a channel for switching the Warm-White LEDs:
…
-
Hi,
i just tried out the Solid RGB Strip feature on my H801 Controller.
I think this part of the code should be outside of the switch (_type) statement.
```
#ifdef WLED_USE_ANALOG_LEDS …
-
**Have you looked for this feature in other issues and in the docs?**
yes
**Is your feature request related to a problem? Please describe.**
The current PWM resolution of H801 in Tasmota …
-
Hi, im using a h801 controller with one channel led panel - it is flickering with brightness < 30% - is there a way to set the min value to 30% to prevent flickering? For example all values from 1-29%…
-
> **GUIDE**
>
> This BUG issue template is meant to REPORT Tasmota software BUGS ONLY>
>
> Please DO NOT OPEN AN ISSUE:
> - If your Tasmota version is not the latest from the development branch,…
-
Hi all
I have the H801 LED controller. https://github.com/arendst/Sonoff-Tasmota/wiki/H801
I have it working fairly satisfactorily using the RavenCore using device type 14 and I've address the G…
-
### PROBLEM DESCRIPTION
I've got setoption17 set to 1
The moment I issue the following command:
Color EDA20C0000
Setoption17 is automatically set to off
### REQUESTED INFORMATION
_Ma…
-
Hi,
would it be possible to allow fade command also in PWM mode (SetOption15 0)?
I'm using H801 to control two white led strips (W1 and W2). Fade command is not found until SetOption15 is ON.
-
When flashing the latest dev build (commit f18c901c3f0f99211175c08a5b204311609f4447), the LED stripes controlled by the h801 are flashing with the highest brightness after some period of time and the …