-
I: Bus=0003 Vendor=2563 Product=0526 Version=0110
N: Name="ShanWan PC/PS3/Android"
P: Phys=usb-xhci-hcd.0.auto-1.3/input0
S: Sysfs=/devices/platform/ff500000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.3/1-1…
-
a) There is an HCD and CID mass error, but no unit is given in the GUI.
Also one is 50 and the other 500 by default? Would it be possible
to insert the unit [ ppm, Da ] and focus [precursor, product…
-
反馈bug/问题模板，提建议请删除
## 1.关于你要提交的问题
为避免重复issue，请先搜索issue，确认没有类似issue再提交新issue；
注意搜索时**包括已关闭**的issue（删掉搜索框的的“is:open”条件）；
Q：是否用关键词搜索了issue? (使用 "x" 选择)
* [ ] 没有类似的issue
## 2. 详细叙述
### (1) 具…
-
I use this camera with Slack making calls. Somes, it works but then I stop working I have to reboot the system. The unplugging camera does not help. I did try switching from USB 3 to order USBbut it d…
-
```dts
&usb_otg {
dr_mode = "host";
status = "okay";
};
&usbphy {
dr_mode = "host";
status = "okay";
};
```
```diff
diff --git a/buildroot/board/otter/ottercast-S3/linux/defconfig …
-
**Describe the bug**
Since the upgrade to silverblue 40, I'm not able to use the front speaker as they are not listed any more. I also lost the ability to use a jack's headset.
Fortunately, I can …
-
Hi,
I've been asked to try to open Tigerbox 1203...
Holding reset and power button made to enter some sort of "Mask ROM mode":
```
May 17 15:16:47 kernel: usb 1-7: USB disconnect, device num…
-
The Ubuntu image provided does not work for me, following the posted instructions (Microchip website), when I plug in the USB nothing happens, and I cannot find the board, if I run dmesg, I see the fo…
-
### Describe the bug
I configured the **MediaTek MT7986 802.11ax/b/g/n** radio as both ap and monitor (for WIDS purposes) on my BananaPi BPI-R3. Running `tcpdump -i phy0-mon0` runs fine with no pro…
-
Device [https://www.aliexpress.com/item/2251832668606248.html](https://www.aliexpress.com/item/2251832668606248.html) 4MP 48V POE, sensor branded as sc5239s which should be a sc223a.
Flashed with `…