-
### Category
Other
### Hardware
Other
### Firmware Version
v2.5.0.ab7de7f and 2.4.x
### Description
**Device under test**
Heltect HT-CT62 but other ESP32 device seem to be aff…
-
The hatlabs website page about the sailor hat says there is a solder jumper to disable the watchdog but I can't see one. The docs explain how it works but they don't say where it is. All the other jum…
-
I am using Raspberry Pi 4 and HTPA32x32d thermal camera sensor. I am using https://github.com/cjcbusatto/thermografree this fork for reading the camera with I2C.
I use this sensor in my project And…
-
I used the lvgl_micropython project to update my esp32n16r8-ili9488-ft6x36. It originally had a usable LVGL MicroPython, but it's quite outdated (MicroPython 1.19). After compiling the firmware, I cou…
-
### SOC
ESP32
### Lora IC
[SX1276](https://www.semtech.com/products/wireless-rf/lora-connect/sx1276#documentation)
### Product Link
https://shop.m5stack.com/products/lora-module-868mhz-…
-
Hi,
I have no issues using the HTU21D, but when I run `[hex(x) for x in i2c.scan()]` it does not show up in my list of i2c device addresses (i.e. I do not see '0x40' anywhere). Running `sudo i2cdet…
-
I am using the I2C outputs of an Arduino R4 minima board to make it communicate with other boards. I notice that the `Wire.end()` function does not seem to work. I commonly use this instruction to alt…
-
### Windows Version
Microsoft Windows [Version 10.0.19045.5011]
### WSL Version
WSL version: 2.3.24.0
### Are you using WSL 1 or WSL 2?
- [x] WSL 2
- [ ] WSL 1
### Kernel Version
Linux version …
-
Running on Manjaro Linux. Installed 2.1.4 - the monitor is detected fine but I had an issue after a reboot, ddcutil seem to have locked up the system after logging in. Decided to dig in, cloned 2.1.5-…
-
The [rp2350 SVD file](https://github.com/cmsis-svd/cmsis-svd-data/blob/main/data/RaspberryPi/rp2350.svd) has a long, multi-line description tag inside the root device element:
```
Raspbe…