-
When trying to build on a Pi Zero W (using DietPi as the base OS) I get the following:
> ```
> .../fbcp-ili9341/diff.cpp: In function "int coarse_linear_diff(uint16_t*, uint16_t*, uint16_t*)":
> …
-
I use the commands getfontWidth() and getfontHeight() to get the font size in x and y dimensions, which is further used throughout the 9,000 lines of code to place text on the screen and also to erase…
-
Hi,
I connected an SPI display with touchscreen to my raspberry, it's an ILI9341 2.8" with XPT2046 touch controller;
it works fine in the installed OS with this options:
`dtparam=spi=on
dtoverla…
-
Hi,
I have connected both VS1053B and ILI9341 both on the SPI bus (as described in the Hardware section of the manual), but the audio is then chopped, sounds like the network connection is bad and n…
-
### Perform all steps below and tick them with [x]
- [x ] Check the related part of the [Documentation](https://www.openhasp.com/)
- [x ] Update openHASP to the latest version
- [x ] Reproduce …
-
Good evening, I used the compiled version "esp32-2432s028r_full_4MB_v0.7.0-rc9_c200edf" correctly on my device, now I have updated to the rc12 version but unfortunately I have display problems on the …
-
ESP32
Adafruit_ILI9341
Problem:
drawCircleHelper does not draw any pixels on screen.
Reason:
it seems since its a "helper", it does not initiate startWrite. When in use from drawRoundRect…
-
Hi :) First of all i love this cute little Device!
But could you Pleeeease provide the Sourcecode?
A lot of people would love to integrate it into Home Assistant or do cool stuff with it.
Thank …
-
#### old display driver not working
calibration not working too
https://github.com/tias/xinput_calibrator/blob/master/scripts/xinput_calibrator_pointercal.sh
Old files no longer exist,
http:/…
-
My wife is complaining that the LCD display is too bright in our living room.
So I tried to find out, whether it is possible to dim the display and how.
Looking at your code, I found out that the di…