-
I did some tests for temp reading. I get the following readings from internal sensors in standby (no devices connected on WiFi) with a room temp of 20C:
phy0 2.4Ghz -> 68C
phy1 5Ghz -> 43C
On the…
-
### The problem
The remote receiver class I configured is just outputting garbage.
The signal of the TSOP1838 ir receiver is clean, verified with an osciloscope, and it works on a Arduino UNO board …
-
https://www.futurelearn.com/courses/robotics-with-raspberry-pi
## What you will learn
* Using the GPIO pins on the Raspberry Pi for both input and output
* How to connect motors via a motorboar…
-
Hi,
Is there, or will there be support for obtaining camera intrinsics using the ifm3d-ros driver?
If yes, are they only for the unrectified images?
Using "ifm3d schema --dump" I see the "INTR_…
-
## Device
- Product name: Tuya Smart Air Box
- Manufacturer: _TZE200_8ygsuhe1
- Model identifier: TS0601
- Device type :
- Sensor (temperature, humidity, co2, voc, formaldehyd)
…
-
Communication networks and systems in substations. IEC 61850 . 2003
[2] Kaczkowski A,Knoth W.Combined sensors for current and voltage are ready for application in GIS. CIGRE Rep12-106 . 1998 [3] R. G…
-
### DB Selector
DB3K
### Baseline
_No response_
### Hypothetical
Yes
### Name
Peregrine missile
### Length (m)
circa 1.8
### Width/Span (m)
Unknown but somewhere betwe…
-
So I've been testing the PV charging today. Here are my findings for "logical" issues:
1. If you stop feeding pGrid on MQTT, it does NOT stop charging. You have to manually stop it again.
2. Examp…
-
Hello, I would like to ask if LiveScan can export depth images and RGB images. I have tried many versions, but can only output point cloud files after ICP fusion, because my research requires depth im…
-
Just ran it on my EV3 and unfortunately it doesn't seem to balance well.
Trying to find out why, I think the wheel sizes may be different? Are you aware of what size wheels are needed for this prog…