-
>1. Our installer will blindly plow past errors with pipenv (not great, but manageable)
```
Requirements file provided! Importing into Pipfile...
Installing dependencies from Pipfile...
🐍 ▉▉…
txoof updated
2 years ago
-
As it seems, the config parameter max_refresh (which is set to 30 in my case in paperpi.conf) is ignored. Every four changes there is a hard refresh. See this, the last refresh is done right before th…
-
See [issue here](https://github.com/txoof/epdlib/issues/21) from @jhaake2308
> As it seems, the config parameter max_refresh (which is set to 30 in my case in paperpi.conf) is ignored. Every four …
txoof updated
2 years ago
-
There are no python libraries for `1448×1072 high definition, 6inch E-Ink display HAT for Raspberry Pi`
https://www.waveshare.com/wiki/6inch_HD_e-Paper_HAT
Can you add python support for this devi…
-
Sorry if this is incredibly basic, but I've installed papertty on my raspberry pi 3 with a 9.7" waveshare epaper screen and it's been running quite well. I've gotten the VNC, image, etc... features ru…
-
Hi,
thank you for publishing this great project!
It is really impressive what you managed to do via a USB connection.
Now, are there any updates to this project or did you abandon it?
I would …
-
Hi,
now running with `#define MAX_TRANSFER 120*1024` which gives me a improvement up to 25%
```bash
time it8951 -c /dev/sda 0 0 1024 758
Filling buffer by dummy data (length 776192)
Start of…
-
infos from https://www.waveshare.net/w/upload/1/18/IT8951_D_V0.2.4.3_20170728.pdf
```
Added 0xA5 - Fast Write Memory command for load full image
In this version, we added the following new comm…
-
I've got a tough one. I can successfully use papertty with a epd5in83 display, but when I try to use it with an IT8951 and a 9.7" display, I get the following errors:
```
$ sudo papertty --driver …
txoof updated
3 years ago
-
Same as the issue [#48](https://github.com/txoof/epd_display/issues/48). 32-bit (Bullseye) works fine, but in the 64-bit version, something in the PyCairo dependency is causing the script to fail.
…