-
Hi!
How much effort would it be to support the STM32 MCU which is contained on this RF module?
https://shop.in-circuit.de/product_info.php?products_id=180
The module contains a STM32L151CC connec…
-
Hello,
With v1.0.4-B55, I have an error ! Here is the startup log ! Do you have a solution please ?
Control = Failing
Status = OK
Thank you very much for the work.
9/12/2023, 12:20:27 PM] R…
-
Add all mqtt and knx accessories to the example.csv file
hjltu updated
4 years ago
-
Dear Robert,
I move from HomeKit to HomeKitty the whole house yesterday.
Mostly of my equipment are wired KNX. Everything seems working well but slatted blinds.
After adding slatted blinds t…
-
This issue is moved over from the core repo. The complete issue can be read over there: https://github.com/smarthomeNG/smarthome/issues/291
> To easily change DPT 2 knx entries via VISU it would be…
-
Hi,
Seem like your repo is about linking the KNX bus to the french linky electricity meter/breaker.
Have you more information ?
What kind of hardware did you use?
Some pictures and "howto" …
-
Log is always INFO. Just for the record.
http://knx-user-forum.de/smarthome-py/29346-loglevel.html
-
Hi,
most features seem to work fine, however without `-B single` I cannot use ETS to assign addresses to devices, and with -B single not all KNX events are correctly received by knxd (I cannot see …
-
Currently trying to make knxd run on a raspberry pi but I get the following error when starting it up:
```
Aug 12 14:28:13 raspberrypi knxd[25185]: E00000068: [21:B.tpuarts] low_latency /dev/knx-s…
-
after using Wireshark i found KNXD always sends all KNX/IP Multicast packets with a TTL of one.
Is there any way to change this, I couldn't find an option? My KNX/IP router uses 16. I use a routed …
MGKQB updated
9 months ago