-
Partly based on https://github.com/LinuxCNC/linuxcnc/pull/2359
Add support for smaller float types.
(And consider pulling the PR into 2.9)
-
Hi,
Thank you so much for putting together the howto and the vfd.* files. I'm a linuxcnc/HAL n00b, so please bear with me. I followed the instructions exactly as outlined in the README and here's w…
-
I think self.methond should be self.method. ;)
` if self.method == "" : self.methond = "cubic"`
https://github.com/scottalford75/LinuxCNC-3D-Printing/blob/master/compensation/compensation.py#L…
-
In https://github.com/LinuxCNC/linuxcnc/pull/1314 it was discovered that the ascii output for the timing diagram in question,
https://www.plantuml.com/plantuml/txt/TP1D2i8m44RtSugXQojQnPzThfBIZXre…
-
they should be updated, if still relevant.
https://github.com/LinuxCNC/linuxcnc/search?q=python2
-
We don't really have an overview of the hardware LinuxCNC can be used with in the docs.
So this is about creating a page in the docs based on this wiki page: http://wiki.linuxcnc.org/cgi-bin/wiki.p…
-
## Here are the steps I follow to reproduce the issue:
1. Load a file that has a deliberate typo ( G4 X2)
2. Press Start.
## This is what I expected to happen:
LinuxCNC should throw an inte…
-
I did a fresh install of Debian 11 as shown here
https://gnipsel.com/linuxcnc/debian-11.html
Then cloned and built a deb for LinuxCNC 2.9 (Master) as described here.
https://gnipsel.com/linuxcnc/…
-
I've been compiling a little reference for myself. Figured I'd share here if its of any use to anyone:
# LinuxCnc EtherCat (LCEC)
## Installing
### Setup
1) Install Realtime Kernel https:/…
-
Hi.
I get the error when i start linuxcnc:
ATCduino_gui.hal:1: Pin 'ATCduinoui.hal_spinbutton1-s' does not exist
Have any idea why?
Thanks