-
Hey,
I use 120 WS2812 wit a 4A 5V power supply (limit 3800mAh). The firmware is 0.8.5 on two different ESP8266 boards. I want to use a self soldered ESP12E board with minimal space requirements. Wit…
-
Hi,
I tried your app as repeater with a Wemos mini D1.
Flashing works fine, but after flash is finished and reset of the chip no SSID "MyApp" is found.
Is this a known issue?
-
ESP32 S2 Mini uses dual UART USB and changes active USB port when switching to firmware upload mode. ESP Web Tool breaks with this board:
Connecting via Web Serial works well, selection menu shows…
-
I'm trying to test this - and the SHT85 library
I installed this library, with dependencies but examples/SHT31_demo/SHT31_demo.ino fails to compile
I'm using esp32->LOLIN Wemos D1 mini, but thi…
-
hi I have below config:
```
substitutions:
name: esp32s3-salon
friendly_name: ESP32S3-Salon
esphome:
name: ${name}
friendly_name: ${friendly_name}
min_version: 2024.6.0
name_add…
-
### Checklist
- [ ] The title of this issue is "to the point" and descriptive.
- [x] This issue describes what is happening.
- [ ] This issue describes what components are affected (e.g. name of pl…
-
arduinoJson v6 apis have implemented some changes in using JsonBuffer and JsonObject classes.
-
### Basic Infos
#### Hardware
**WiFimanager Branch/Release:**
- [ ] Master
- [x] Development
**Esp8266/Esp32:**
- [x] ESP8266
- [ ] ESP32
**Hardware: ESP-12e, esp01, esp25**
Lolin D1 …
-
la lecture du linky a un probleme
sur un autre firmware la lecture se faisait correc…
-
Hi @earlephilhower, thank you for the work on this plugin. I did use it successfully before. Currently, however, I am facing issues connecting to the board. The error message does not give me a clue.
…