-
Hello,
I am successfully using this firmware with [LR1302 from Elecrow](https://www.elecrow.com/lr1302-lorawan-gateway-module-spi-eu868-sx1302-long-range-gateway-module-support-8-channels.html) and…
-
I`m just discovering the existence of LoRa and have bought an RFM95 and connected the following pin-out
`
PI Port RFM95 Port
3v3 = VCC
GND = GND
GPIO10 = SPI_MOSI = MOSI
GPIO9 = SPI_MISO = MISO
G…
-
Hi,
Thank you for the excellent instructions you have shared. My Raspberry (LoRa Gateway) and Arduino ATmega1280 clone (LoRa end device) has worked in 1 shot combined with NiceRF chip each (from Aliee…
-
When the gateway is not equipped with a GPS module and is configured with `fake_gps: true`, the time information is not added to the "DeviceTimeAns" MAC command specified in [LoRaWAN 1.0.3](https://lo…
-
Hi,
If possibly, could you add separate tracker_0 and tracker_1 ID's for when having two receivers modules with different antenna's ?
Kind regards,
Ben
zanco updated
6 years ago
-
I'm getting messages over LoRa and sending to HTTPS server over WiFi.
All works except once in a few hours (quite randomly) board crashes. I tried with ESP32 v 1.0.2 and 1.0.3.
I suspect that issu…
-
Hi, I compile the files using `make lora_gateway` and `make lora_gateway_pi2`
They both give me warnings and errors
Help please? and thanks.
> gexindeMacBook-Pro:gw_full_latest gexin$ make lora_g…
-
Hello Dr,
I am using RPI3 with RFM95W module as my gateway, my end device is an Arduino unoR3 and a BME280 with the another RFM95W module.
I set up the gateway as instructed, and I used Arduino_…
-
## Event Name
TTN Conference 2022
## Type
Conference
## Focus / Target Audience
LoRaWAN
## Event Website
https://www.thethingsnetwork.org/conference/
## Medium
In-person
…
mpous updated
2 years ago
-
Hello @CongducPham,
Am trying out to use waziup for soil moisture monitoring so far i have hit a deadlock on connecting the sensor to communicate with the gateway.
View serial monitor logs
```…