-
The primary purpose of this issue is my **issue A** below, but it may or may not relate to **issue B** as well, so figured I should add them to the same issue ticket just in case they are related.
…
-
### Boards
BW16 (RTL8720DN)
### External Hardware
ILI9341 display
### Hardware Configuration
No
### Version
latest master (checkout manually)
### IDE Name
Arduino IDE 1.8.13 and Arduino IDE 2…
-
The recent accidental breakage of the FreeRTOS+LwIP build (#216) once again underscores how important it is to test as many supported platforms in the CI as is reasonably possible (I'll make an except…
-
I have wondered about using the rp2040 chip with IP networking, but using the UART ports (or usb-serial, the recent PIO-based Ethernet MII interface, or even USB-CDC/ENCM) rather than the CYW43 device…
-
I have a C++ codebase which contains a group that is defined properly for doxygen and is also exported to XML and HTML successfully. When I try to reference this exact group by its name from asciidoxy…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hi all.
When I run ocproxy on openconnect, after a while connections stop routing and this log appears in stdout:
warning: lwip_data_cb: could not allocate pbuf
what this means and how can I …
-
**Describe the problem you have/What new integration you would like**
Currently when using DHCP and deep-sleep, a full DHCP IP negotiation is required at every wakeup, which requires time and…
-
### Answers checklist.
- [X] I have read the component documentation [ESP-IDF Components](https://components.espressif.com) and the issue is not addressed there.
- [X] I am using target and esp-id…
-
(This is a good candidate for a "first bug" if someone is interested in contributing but unsure where to start.)
Bug was noted in #91 when using select() - the timeout argument to select appears to t…