-
My SunGrow SG2.5RS-S inverter times out on 'self._send(GET_KEY)'. After (the default 60s) timeout the communication proceeds without encryption and returns valid values. When commenting out 'self._sen…
-
Investigate this.
Previously connected to 192.168.50.158, then disconnects, then finds 192.168.50.158, then print `ModbusTCP:Creating with: ('192.168.50.96', 1502..)` then actually connects to 192…
-
```
What steps will reproduce the problem?
1. Run your slave software
2. Send a modbus TCP/IP ADU request with one byte per TCP segment (this is
legal according to RFC 793). Maybe this can be achieve…
-
```
What steps will reproduce the problem?
1. Run your slave software
2. Send a modbus TCP/IP ADU request with one byte per TCP segment (this is
legal according to RFC 793). Maybe this can be achieve…
-
```
What steps will reproduce the problem?
1. Run your slave software
2. Send a modbus TCP/IP ADU request with one byte per TCP segment (this is
legal according to RFC 793). Maybe this can be achieve…
-
```
What steps will reproduce the problem?
1. Run your slave software
2. Send a modbus TCP/IP ADU request with one byte per TCP segment (this is
legal according to RFC 793). Maybe this can be achieve…
-
```
What steps will reproduce the problem?
1. Run your slave software
2. Send a modbus TCP/IP ADU request with one byte per TCP segment (this is
legal according to RFC 793). Maybe this can be achieve…
-
```
What steps will reproduce the problem?
1. Run your slave software
2. Send a modbus TCP/IP ADU request with one byte per TCP segment (this is
legal according to RFC 793). Maybe this can be achieve…
-
win10.
The socket created by 'modbus_tcp_listen' Cannot be closed correctly by ‘_modbus_tcp_close’ or '_modbus_tcp_free'.
The TCP IP address and port are still occupied after use 'modbus_close' an…
-
### Bug Description 🐞
I'm using the asset Modbus2MQTT to read values from different devices but in some of them the Slave ID is set to a different value then 1 so I can't read from that device.
### …