-
When I use the NI DAQ device adapter during MDA, it sometimes sends two TTL signals out when it's supposed to send only one. So far I’m not able to find a reproducible condition, but it seems that onc…
-
Hey there,
I'm looking to install ImSwitch on Raspian on a Raspberry Pi 4 for a flourescence microscope build based on UC2. I want to use it to controll the stepper motors and visualize the pi came…
-
Hi,
I am using Neuropixels and have different streams recorded, both the hipass AP and the LFP, as well as digital signals using a NI acquisition board, all boards reside in the same NI box. I config…
-
Hi,
I am trying to use open-ephys to record from Neuropixels probes. For the time being, I want to use Head Stage Dongle to test the head stage without probes. Though there is a description in the N…
-
Only way is to remove and re-add the AO device. Not a show-stopper, but unexpected and ugly.
-
-
I'm working on a Windows 10 with an NI chassis, PXIe-6341, BNC-2110. Got the following error while trying to install the NI-DAQmx through the GUI's Plugin Installer:
Downloading Plugin: NIDAQ...
…
-
System: Windows 10 x64
JUCE: v6.1.2
Hi,
I'm in deep trouble with software related to Ephys Acquisition running with OpalKelly FPGA drivers (RHX and OpenEphys). I can install OpenEphys with …
-
-
I have a BNC-2110 connected to a PCI-MIO-16E-4 card with NI-DAQmx Version NI-DAQmx 19.0 (which is the latest supported version for this card). The NI-DAQmx module in the OpenEphys GUI works as expecte…