-
*jburgess777:*
I recently updated a Raspberry Pi 3 to a recent LEDE git master build: Reboot (SNAPSHOT, r4576-9fe9175)
The kernel keeps logging the following errors:
[ 103.041158] bcm2835-cpuf…
-
*jburgess777:*
I recently updated a Raspberry Pi 3 to a recent LEDE git master build: Reboot (SNAPSHOT, r4576-9fe9175)
The kernel keeps logging the following errors:
[ 103.041158] bcm2835-cpuf…
-
I was going to build the container for a 32 bit ARM device (a raspberry Pi 4), and while troubleshooting I came across the deprecation notice on the [Docker Hub page](https://hub.docker.com/r/aarch64/…
-
A task list for hardware support for the RaspberryPi Pico. (Inspired by #38657.)
## Peripherals
- [x] ADC and temperature sensor
#45363
#53591
- [x] DMA
#53892
- [x] Flash
#47806…
-
**Describe the bug**
With either `dtoverlay=disable-bt` or `dtoverlay=miniuart-bt` set in `usercfg.txt` (or `config.txt`) the bootloader does not initiate. After powering on the Pi, it is stuck a…
-
There is a hardware bug in the I2C on Raspberry Pi that causes data corruption on devices that use I2C clock stretching.
Hardware bug references:
- https://github.com/raspberrypi/linux/issues/254
- h…
dlech updated
8 years ago
-
I'm using the most recent version of telegram-cli from FHEM on Raspberry Pi.
I've registered successfully and when I try to send a message interactively, it works perfectly.
I have created a simple s…
-
This affects both upico and uhub. I skimmed both forum threads on clock work pi, upico+uhub pcb images and the schematics pdfs in both your repos.
My best guess is that I seem to see solder pads s…
-
The Raspberry Pi 4 B has a new brand SoC BCM2711 (1.5GHz Quad A72, VideoCore 6)
- LPDDR4 (1-8 GB)
- VIA Labs VL805 USB 3.0 Host controller (XHCI)
- USB bridge with 2x USB 3.0 and 2x USB 2.0 ports
…
-
**Describe the bug**
I'm running Theengs Gateway on a Raspberry Pi Zero, and getting pretty consistent CPU load of ~ 35%.
**To Reproduce**
Steps to reproduce the behavior:
1. Install TG in a ven…
floe updated
8 months ago