-
Hi,
Im using a DUE with a RADDS Board and a RepRap Full Graphics Controller, In the latest bugfix-2.0 Version the serial connection is no longer working.
How to reproduce:
Get the default con…
-
#### Where to find it
The [`bugfix-2.0.x-new-layout`](https://github.com/MarlinFirmware/Marlin/tree/bugfix-2.0.x-new-layout) branch is a refactoring of the Marlin 2.0 codebase which includes the 32…
-
Hi all
@MrAlvin havde made the next version of the Ramps board, but I have some issues getting it to work. Just reading temps and getting a response from M119 is royal pain in the rear.
He made …
-
Hello,
We're using your excellent blackmagic v2.1 probes to flash and debug a SAM3X8C chip however we're running into some issues with flashing that seems related to the code size.
For example every…
-
DueTimer's [Readme](https://github.com/ivanseidel/DueTimer#readme) states:
> Prefer to use Timer3, Timer4 and Timer5 since they have no connection to hardware pins.
I don't quite get this. Which pi…
-
Yesterday I attempted to setup RRF to compile. I downloaded the recommended programs. Downloaded the dev branches of each of the projects and attempted to compile. recieved the following error about G…
-
Hi there
With the current bugfix version I experience lost steps on all axes with 8825 Stepper drivers
I tried the versions from June 16. and June 14.
The bugfix version from june 3. works fine
…
-
I'm playing with `samples/net/sockets/dumb_http_server_mt` sample on `nucleo-f429zi` board. I have tried several network stack configurations and found out that when I increase number of `NET_TCP_BACK…
-
Debugging a SAM3X chip (on the Arduino Due) works in both JTAG and SWD mode, but attempting to load a new elf fails with:
Error erasing flash with vFlashErase packet
This happens in both JTAG and SW…
-
I know the discussion here https://github.com/MarlinFirmware/Marlin/issues/10294. But on my Ultratronics (SAM3x) Board it is not working when the diag1 is in open drain mode even when the Sam3x input …