-
**Describe the bug**
The wifi device doesn't appear with `ip a` command.
Failed to run INIT ucode: -110
`dmesg |grep iwlwifi` gives:
```
[ 4.150315] iwlwifi 0000:00:0b.0: can't derive rout…
-
Is the clock gen test method up to date in the doc? I've performed a GBS-C AIO build, including the clock mod. The clock mod was done according to both Rama's Github documentation and the GBS-C AIO do…
-
It is quite typical to have multiple I2C or SPI devices hanging on the same bus, but with the current scheme and move semantics the driver is taking possession of the handle, blocking the use of multi…
-
### What would you like to know?
In hardware version r9 Si5351c was replace with Si5351a and u16 switch. How to enable clkin and is there a way to check by software that external clock/tcxo is in use…
-
Dear All,
As explained by RFNoob in https://github.com/eried/portapack-mayhem/issues/79 CLKIN port of Hackrf with Mayhem firmware emits/leaks 10Mhz reference signal. Moreover, I observed some unexp…
-
Having a bit of a weird issue. For context I have only used the GBS with my Xbox over component, and it is displaying output.
I have tried two different Si5351 external clock generators. I have con…
-
Amazing...
CC [M] /root/media_build/v4l/m88ds3103.o
CC [M] /root/media_build/v4l/m88rs6060.o
CC [M] /root/media_build/v4l/mn88472.o
CC [M] /root/media_build/v4l/mn88473.o
CC [M] /r…
-
Hi Roel
Would you share the circuit diagram? From what ive read the SI5351 needs an RF output filter and the information is murky.
Do you use the SI5351 breakout module or your own circuit?
T…
-
First many thanks for amazing library.
Board:Esp32-wroom-32U
Other settings from platform.io:
````
platform = https://github.com/platformio/platform-espressif32.git
board = esp32dev
framework …
-
hello again, hope not to disturb. I loaded the last update and I found that it does not recognize the sensor, the probe takes 15 seconds to start, it takes 35 seconds, and it does not throw the sensor…