-
# 4/17/24
- [ ] Updating the header to be smaller 600x150 - tested previously
example is - 646x113
![TPW Knack Banner - FORMS 646x113](https://github.com/cityofaustin/atd-data-tech/assets/21112975/…
-
The 1X2-SMD-HEADER, 1X3-SMD-HEADER, and 1X5-SMD-HEADER, all link to the same Digikey page. Is this intentional?
There doesn't seem to be links on that page to differentiate the headers.
Addition…
-
I noticed there is support for LOD's but how is it formatted in the .qc
-
Nicely done! Mainly do software engineering, although currently researching SMD synths and sequencers because I want to add an SMD sequencer to the x0xheart.
Up for doing that x0xb0x sequencer con…
01GOD updated
5 years ago
-
Maybe is possible to use the Dell module to get switches in addition to keycaps? Possible (or not) methods:
- Desolder the switch
- Use the soldering iron tip to heat the switch SMD pads from ab…
-
I searched for a stemma qt female socket for pcb design in 3d cad parts but couldn't find one. If there's one on a board or module you could direct me to that would be ok too. Ultimately I'd like to s…
-
I'm not sure if I'm doing something wrong or why this happens, I'm very very new to modeling and animation and stuff so I'm sorry if this is just my lack of knowledge.
I exported Mario's model from…
-
The schematic and board uses a MCP6001U and not a plain one without U. The U type has a different pinout (see data sheet)
So the corrcet Mouser part would be
579-MCP6001UT-I/OT
-
您好,我想知道如果需要自定义一种数据集来进行异常检测,该怎么制作呢?和SMD SWAT这些开源的数据集制作方法一样么?如果您有想法的话,不胜感激。
-
```
I want to Use 5050 smd Led strip insted of RF-W2SA50TS-A34.
But I noticed that Led strip forward current is 150mA (and the RF-W2SA50TS-A34
is only 30 mA) - see attached datasheets.
I assume tha…