-
Hi Folks!
I am just about to getting started using this lib. I had a good look at the lib and have a few questions before I start.
1. If I understand correctly, this lib provides the CANopen mac…
-
Hi,
I noticed that there are a lot of file duplication in the `./boards/` directory. This is probably a very late point in time to try and fix this, but I am prepared to give it a go. In my PR #78,…
-
I found the cause for this to be sleep(). If UART_SERIAL_ENABLED is not defined and subsequently the ISR is not attached, it does not return, so after 10s the watchdog gets triggered and restarts the…
-
### Description
I want to use the built-in DFU bootloader of the STM32F072. It can be initialized using the BOOT0 pin or by software.
To start it via software, a magic code has to be written to a …
-
**Porting layer**
- [x] Device Controller Driver (DCD)
- [ ] Host Controller Driver (HCD)
- [x] Board Supported Package (BSP)
- [ ] OS Abstraction Layer (OSAL)
**Description**
I do not kno…
-
Hey, Jibbow. My name is Gustavo and I'm from Brazil. I'm implementing one-wire slave on STM32F072CBux.
I'm very interested in your project. Can you give me your contact?
Best regards,
Gustavo.…
-
Communications via WiFi, LoRa or GSM modules need lots of time to establish connections and wait for data. In the current software it is not possible to run these tasks from within the main function, …
-
Hi,
i am the maintainer of https://github.com/BenRoe/awesome-mechanical-keyboard
Did you tested the latest version of the pcb? I wanna add this nice pcb to the list.
-
**Describe the bug**
samples/drivers/CAN cannot be built for any other boards except for nucleo_l432kc and stm32f072b_disco
If that is intended, then this probably needs to be mentioned in readme
…
-
What I have to change to use with stm32f072?
thank you