-
#### Summary
We would like to see support for multiple channel plans on the same gateway concentrator.
As @htdvisser has suggested in [https://github.com/TheThingsNetwork/lorawan-stack/issues/7…
-
TLDR:
I have implemented a method to get LGSM alerts to be distributed via the MQTT protocol.
I am looking for feedback on it , review the implementation AND on guidance on how to get it prepped f…
-
### Summary
As mentioned in https://github.com/TheThingsNetwork/lorawan-stack/issues/5906 one should be able to run the command `ttn-lw-cli end-devices list [application-id] [flags]` to get an export…
-
#### Summary
In case downlink scheduling fails, NS should retry with a backoff
#### Why do we need this?
To not end up in an infinite loop
#### What is already there? What do you s…
-
Hello there,
is there any support for ThingsNetworks LoraWan gateway with OTA activation?
Thanks, Ondřej
-
#### Summary
The Console currently only shows the raw event JSON in the event details panel (sidebar). We could provide a better experience here by facilitating common actions related to the event pa…
-
Hello,
I'm using an SX1276 on a custom hardware with your library. I use European frequency bands and push data to TTN at the moment 11 bytes of payload every 5 seconds (5 seoncds for testing, in r…
-
#### Summary
If firmware has a remote "reboot" command and the operator sends this as a confirmed downlink, both the device & stack end up in a perpetual loop as the downlink doesn't get ack'd so the…
-
Hello,
i'm bought the LORA Gateway kit from STm, link https://www.st.com/en/evaluation-tools/p-nucleo-lrwan2.html
Downlink data recieve by server in ABP mode. But does not work OTAA. I found that …
-
I have a need to run a small (aka cheap) single channel gateway that could very well be destroyed at any moment, hence the need for cheap.
I've locked this gateway down to a single frequency and da…