-
### Issue description
Unable to build MK4Duo without LCD.
### Firmware version
MK4duo 4.4
### My setup
RUMBA32 with 6x TMC5160
Delta with sensorless homing and sensorless endstops
NO LCD…
-
Any word of advice on interfacing trinamic drivers on board instead of the a4954 stepper drivers? This so stepper operation can be quieter.
-
Hi,
just got my Octopus 1.1 and try to upload Marlin on it. But after connecting via usb board not detected by Windows (no new devices in Device Manager, any type), aslo not detected by STM32CubePro…
-
We bought a Palette 3 Pro in order to provide automated spool swapping for a large format 3D printer we're working on. This printer uses 1.75 filament, and we normally run it with a 1.2mm nozzle and .…
-
I have problems with my BIGTREETECH SKR 2 board with a STM32 F429 chip on it.
I am using the current "Marlin-bugfix-2.0.9.2.x" branch from just now.
Performs builds for the BIGTREE_SKR_2_F429 enviro…
qulet updated
2 years ago
-
Hi,
can someone tell me the PWM Pins for the Partcollingfan?
FAN0 and FAN1 is used for hotendcooling.
So i choose FAN2 for the Partcooling, but they just start working @80% and this is full blas…
-
I have an example dual endstop for lowrider. I believe it is dual yz. But the Z endstops are a problem.
I think it would be best if the home dir was +1, and we set up the probe on Zmin. The two Z e…
-
So I've been running my CNC with CNCjs on my MacBook for over a year without any issues. I have version 1.9.26 installed via the Desktop App. I now want to switch over to running the machine with a Mi…
-
Hi, i wrote a sketch using your library on an Arduino Nano while waiting for an ESP32 to arrive, but when i tried to upload that sketch to the ESP32, VSCode threw an error that your library only suppo…
-
Temmuatlut thanks for the hard work on this library.
I'm working with the 5160 BOB and while testing settings to evaluate what I want to use on my 3d printer I noticed some of the commands for 5160…