-
Hello,
I'm attempting to get Nuttx up and running with LVGL on the ESP32S3 TTGO T-Display S3. ([product link](https://github.com/Xinyuan-LilyGO/T-Display-S3)). As far as I'm aware there isn't curr…
-
Dear TTGO-Team,
I have purchased the v1.0 TTGO ESP32 & SX1276 version here:
https://www.banggood.com/2Pcs-LILYGO-TTGO-ESP32-SX1276-LoRa-868MHz-bluetooth-WI-FI-Lora-Internet-Antenna-Development-Boa…
-
There is a new board version TTGo T-Beam V1.0 which is not supported by this repository because:
- GPS Pins changed
- A Programmable power supply was added (AXP192) which has to be told to turn on t…
EccoB updated
3 years ago
-
Update: See [further below](https://github.com/lnlp/LMIC-node/issues/45#issuecomment-1173196192) for a more complete description of the workaround.
---
I have observed a bootloop after using the…
-
Hi,
I wonder if there's a combination (like connecting EN to GND) to disable the 3.3V regulator and turn the TTGO off. I know I could use deep sleep, but I'd rather cut all power from the device. I…
-
Which pin of TTGO-T4's TFT-backlight?
Thank you.
-
I created a feature branch to enable secure boot optionally, as i think it is recommended to have it enabled if you plan to use the device in production.
Maybe you want to integrate it (currently …
-
Hello, I'm curious to know something. I do not own yet a TTGO T-Display, however, according to the pinout diagram, MOSI (pin 19), is connected to the OLED display of TTGO, however, the RC522 and micr…
-
Hi,
my tt-go is successfull registered with my model 2019 outlander phev.
But after ntp sync, it looks like it's crashing. Any ideas, whats wrong?
Tried with and without MJ18 Support.
```
I (…
-
Hello,
I want to implement support for my 2.13 inch ePaper display that comes with the [TTGO T5 v2.3.1](http://www.lilygo.cn/prod_view.aspx?TypeId=50061&Id=1393&FId=t3:50061:3).
I found the [How-To]…