-
There are various ways to have GNSS receivers provide data to computers, and it's good to meet interfaces that others might expect, as long as it doesn't get too hard or too complicated.
One method…
-
After updating a Tlora-v1 to V2.0.2.8146e84 beta, screen does not turn on.
Device is working as visible in logs, and is sending packets—screen does not display any data.
This is especially an …
-
Hi;
I am looking at enabling WIFI on the pyboard, specifically with CC3200 Module, but before I go ahead and order a bunch of them, can you confirm the required pins ?
I see that clk, cs, miso a…
-
I know ble works by broadcasting and that methods like ccm are available.
In cryptography, a cipher block chaining message authentication code (CBC-MAC) is a technique for constructing a message a…
-
### PROBLEM DESCRIPTION
Connected a GPS module to ESP8266. When ESP8266 is restarted and the GPS module already has a signal, the GPS will correctly set the date/time of the system on startup. Ho…
-
Updating firmware from CLI failed following the [Updating Firmware From CLI : macOS / Linux]( https://docs.sparkfun.com/SparkFun_RTK_Firmware/firmware_update) doc section.
```
python3 esptool.py -…
pyrog updated
2 years ago
-
we interfaced a 16 bit msp430 controller with sim com 800 module.we started testing publish and subscribe test in demo.thingsboard.io using mqtt protocol. we are successfully able to publish our mes…
-
### Describe the bug
I have a custom board based on the sparkfun_samd51_micromod that has a Ublox W102 attached to it. I'm able to use the WiFiNINA from Arduino and Adafruit WiFiNINA Library by only …
-
# Problem
Intention of the following block of code is to provide default value in case if it is missing in the config, but instead it raises `AttributeError` if `dist` has no `include_package_data`…
-
### Category
Other
### Hardware
Not Applicable
### Firmware Version
1.3.6
### Description
nodes should but are not rebroadcasting packets without a valid PSK to decode the payload.
### Relev…