-
- ESP32-C3
- esp-hosted-ng firmware + kernel linux driver
- sha: https://github.com/espressif/esp-hosted/commit/91b093365cc58214532b976dd8749f65523d1e6d
- configuration: WiFi SPI + BT HCI (H4)
H…
-
usb host controller shield (with modified SS pin to avoid conflict) + library wont coexist with seeed wd5500 shield
Each lib works solo but together the 2 libs dont work at all. No usb access and …
-
### Answers checklist.
- [x] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hi esp
I loaded the driver.But there's no device in sight.What's going on?
root@maaxboard8ulp:~/test#
root@maaxboard8ulp:~/test#
root@maaxboard8ulp:~/test#
root@maaxboard8ulp:~/test# insmod es…
-
Is this compatible with PN532 reader connected by SPI/I2C ?
Or only USB devices ?
-
Hi,
it all worked in the past when the system was running on an earlier kernel.
Yesterday I reinstalled and did not find the CH340 Serial
```
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 …
-
# ESP32-C5 support status in ESP-IDF
ESP-IDF v5.4, currently in development, will include initial support for the mass production version of the ESP32-C5 chip.
In the list below, supported featu…
-
Hello, I did the installation according to the instructions, the device is also found as usb-Klipper_rp2040_E6611CB697462729-if00, I also entered that in the pis.cfg, when I restart I always get this …
-
Had a bit of trouble writing to SPI flash to begin with, found this command worked with a generic chinese usb-blaster. Haven't seen this in the readme or anywhere else, forgive me if I'm wrong.
`o…
-
Cloned project minutes ago. Using board = esp32-2432S032C I get the following issue:
```
C:\Users\forre\.platformio\penv\Scripts\pio run -t upload -e esp32-2432S032C
Processing esp32-2432S032C (b…