-
Hello, I'm work with Linux kernel version of:
```
# uname-r
4.6.0-xilinx-22223-gcda28de-dirty
```
I'm allocate CMA of 64M and this is my [dmesg](http://bit.ly/2q6dKL0) output.
[This is](http://…
-
Have a look at the file axidma_dma.c for the function "static void axidma_setup_vdma_config (*******):
>
> // Setup the config structure for VDMA
>
> static void axidma_setup_vdma_config(stru…
-
Необходимо разработать standalone (bare-metal) приложение для управления ядрами VDMA.
-
@bperez77 First let me say thanks for your hard work on bridging the gap Xilinx left for us.
I'm experiencing an issue using your axidma_benchmark example in my system. I've played around with this…
-
Hi there!
I found out that this software (Scatter Gather mode) will not work properly if transfer data size more than 2^23 (8 Mb).
Yesterday I saw the sources and found out that in SG mode only o…
-
Мы работаем с памятью в циклическом режиме т.е. после достижения максимального адреса, например 0xFFFFFFFF, следующим адресом для записи становится 0х00000000, однако, если ранее были записаны какие л…
-
Hello,
I tried ur code with a loopback AXI DMA on zc702 board. the relevant dts is
``` bash
&ps7_axi_interconnect_0 {
ranges;
axi_dma_0: axi-dma@40400000 {
compatible …
-
we ran `axidma_twoway_transfer` function several times,
however I failed to run in 5th step with the error `axidma: axidma_dma.c: axidma_init_sg_entry: 98: Requested transfer address (null) does …
-
На данный момент данные складываются в оперативную память, для того, чтобы мы могли их проверять или как-то в дальнейшем работать с ними, их необходимо сохранять на uSD-карту в Standalone-приложении.
-
Сейчас, получилось так, что сырые данные в ПЛИС должны обрабатываться и в итоге мы должны получать пару чисел, что, с одной стороны, для нас проще и удобнее, но теперь также появилось требование иметь…