-
Hello,
my Multiplus II keeps changing between charging and discharging at MAX_CELL_VOLTAGE = 3.45 (55.2)
Every 10 sec or so.
Is this a normal behavior, or did I miss any settings?
Versions:
…
-
Hi,
I tried to install either by USB,SD card, and SSH but no success to report
1. I inserted the USB stick with the driver (venus-data.tar.gz) and the DALY RS485 cable (other end in the bms) US…
-
**Describe the bug**
A clear and concise description of what the bug is.
**To Reproduce**
Steps to reproduce the behavior:
1. Go to '...'
2. Click on '....'
3. Scroll down to '....'
4. See er…
-
**Describe the bug**
The battery is fully loaded and the daly bms stops charging.
Shortly after it goes into sleep mode and doesn't respond on the uart interface.
In the WebInterface of the MP2 GX …
-
My installation:
- 3 phase Multiplus II 5000/48: Firmware 500
- 4 battery banks (each LiFePo4 with eve 280Ah) with JK BMS : B2A24SP15-CAN
- Cerbo GX: VenusOS 2.93
- Lynx Shunt
- MPPT RS 450/20…
-
Hello Henne,
Thank you very much for this extremely useful and simple driver! It was possible to integrate Ahoiy without any problems.
So far I have used [dbus-mqtt](https://github.com/freakent/db…
-
While viewing the program scan for the BMS, it gets to Lifepower and returns "incorrect data" It doesn't appear any services start as none of the devices (MTTPs, ect) go into ext control.
1. Logi…
-
**Describe the bug**
Just a white screen after update from 0.12 to 0.14.
You can still see the hotkeys in the web interface, but only white in the display area and on the display. No menu or other s…
-
**Describe the bug**
When I reboot the GX device (RBpi) Node Red does not find the source which I chose in the node. I need to reconnect manually all node in node red. It is odd, as the name is exact…
-
**Describe the bug**
On battery monitor using node-red
When no alarm property of dbus message in null but should be 0
"TypeError: Cannot read property 'hasOwnProperty' of null"
**To Reproduce**
…