-
Heute wurde ich von Viessmann per Mail informiert, dass die bisherige API zum 15.07.21 abgeschaltet wird. Bedeutet dies, dass dieser Adapter dann auch vorerst ohne Funktion sein wird?
Falls ja, wird …
-
### The problem
Until recently, the following worked with no issues:
```
action:
service: vicare.set_vicare_mode
data:
entity_id: climate.vicare_heating
vicare_mode: dhwAn…
evx73 updated
5 months ago
-
### The problem
If you read out the states of climate.cu401b_s_heizung
you will find the attributes
preset_mode: home
vicare_programs: comfort, eco, fixed, normal, reduced, standby
active_vic…
-
Hello openv Guys,
first, thanks for all the work you are doing here, it's great.
The Heater is a Vitodens 222-F with a Vitronic 200, Type HO1B
I have a problem with my DIY optolink ESP32. It …
-
Hi,
I would like to test open3e with my Vitocal 200s, Vitocharge VX3, Vitodens 300 and an energy meter E380.
My heating contractor told me, that its not possible to connect all the devices via Can…
-
My gas boiler: Viessmann Vitodens W-100 B1KC 26 kW has exhaust temperature sensor. Would be great to see this information in opentherm gateway...
-
I have some trouble writing datapoints that according to the documentation are writable, but return an error: w ;0x3022;2;220 returns the response:3;0x3022;21
The 3 means Error message, presumably i…
-
Addr 6300h (TempWWsoll) is a 1-byte value. For the get cmd it is right, for the set cmd len is given as 2 - does not work.
https://github.com/openv/vcontrold/blob/master/xml/300/vito.xml
greetings!
-
I have Vitodens 100W gas heater and just have set up OTGateway. Great work and thank you for that. I have both gas heater and heat-water pump and now i'm able to automate between them so i can head my…
-
### The problem
When I try to set the Preset from Comfort to Eco on my E3_Vitodens_300_0821 using the Viessmann Vicare integration I get an error, see attached screenshot
![IMG_1750](https://githu…