-
### What version of Go are you using (`go version`)?
```
go version go1.8beta1 windows/amd64
```
### What operating system and processor architecture are you using (`go env`)?
Building on `…
-
我自己编译了wndr4300的LEDE 17.01.0的固件，打开了128M空间。
但是安装iptables-mod-tproxy时遇到错误提示：
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for iptables-mod-tproxy:
* …
-
hi，The device that I use is Netgear wndr4300 ，I used your firmware，The kernel version is 4.4.74，Does it support USB？
opkg install kmod-usb-ohci
* satisfy_dependencies_for: Cannot satisfy the f…
-
Found it when gaming(out of connect),the problem occur in periodically on my 4300 by using firmware build from the latest code(build by "make ar71xx.usb_large_nand")，QoS Distribution pannle show net …
-
1. 设备Netgear WNDR4300(网件4300)
2. Openwrt Version: CC 15.05.01
3. 安装了 Openwrt-Shadowsocks/luci-app-shadowsocks/ChinaDNS/dns-forward/Openwrt-luci-dist
4. **问题**
开启ss和和设置dns-forward和ChinaDNS，内网下iOS设备…
-
给我发个v2就不能用了？都不敢买了
-
请问access-control访问非常缓慢是什么原因造成的？其他页面均正常，。谢谢
-
`Device: Linksys WRT1900ACSv2 w/ OpenWrt Chaos Calmer 15.05.1`
昨天刚刚入手了新的1900ACS，然后迫不及待的开始配置。完成所有之后发现，路由器会不定时的死机，重启大概5-10min就会死机。死机就是：Wi-Fi信号突然消失，ethernet灯灭了，只剩power亮着，路由器ping不通，当然网页也是上不去 反正就是死死的死了。需要…
-
On recent firmwares, the speed in your script does not seem to be being reported correctly..
it seems to be reporting about a quarter of the speed that is actually being used.
-
mips，mipsle两个版本运行都提示“Illegal instruction”
硬件1：wndr4300
硬件2：newifi-D1
硬件3：newifi-Y1
15.05.1版本的op下只有ar71xx的wndr4300出现Illegal instruction
编译环境go1.8