-
### PROBLEM DESCRIPTION
It seems that issue https://github.com/arendst/Tasmota/issues/16041 is back in the code.
Output from curl http://192.168.178.25/cm?cmnd=STATUS+8
{
"Time": "2024-10-…
-
E.g. detect level flight at a constant velocity, and output average servo outputs, airspeed, current draw, etc.
-
Hi, I've got things running nicely here for my setup with an MPP LV5048 and thanks a ton for this btw, really appreciate the work that went into building it.
My one thing I've been trying to figur…
-
Using Ubuntu MATE on a Raspberry PI 2 B with a Corsair Scimitar:
1) ckb rebinds mousewheel down as mousewheel up. No amount of reseting the bind fixes it.
2) Animations do not run. I have a rainbow…
-
Hi,
everything is working as desired. Thanks for your great support.
I have a question anyway, what data is available in general, e.x. power on each phase, etc.?
Thanks for your help.
André
-
I've bought 3 power/vga/usb hubs. Two rated at 65w and one rated at 100w for charging while using second monitor. All seem to slow charge and display message battery not charging.
Using latest rel…
-
Hi all,
I'm powering the PiJuice Zero using the 12000mAh battery from PiJuice from the J2 connector. To feed this battery I'm using a 30W 12V solar panel connected to a buck converter (~18V to 5.1V…
-
I'm very disappointed with Rassberry Pi Zero and OctoPrint. So I made mix of
- Banan Pi Zero , the same size and compatible with rPi Zero, Allwiner H2+ with 4 cores, external antenna http://www.bana…
-
Hi,
I have the following configuration related to protected branches in config.yaml file:
```
main:
protected: true
allowed_to_merge:
- access_level: developer
allowed…
-
GregTech Community Edition adds its own EU that isn't compatible with any other energy types.