-
Copying [@swifty99's feature request from NeoPixelBus](https://github.com/Makuna/NeoPixelBus/issues/539):
**Is your feature request related to a problem? Please describe.**
For 8bit PWM LEDS, whic…
-
CircuitPython 8.0.0-beta.6
Board - Adafruit Feather ESP32s2
Error message:
```
You are in safe mode because:
CircuitPython core code crashed hard. Whoops!
NLR jump failed. Likely memory corrup…
-
How can I send FastLED information through serial so i can have another Arduino control the led.
I have a library (FHT.h) that isn't compatible with the with the esp8266 so its uploaded on an arduino…
-
If i compile the sketch without line 1 "#define FASTLED_ALL_PINS_HARDWARE_SPI" i get the message rearding bit banging and all is OK. If i include it i get the following errors:
####################…
-
The dongle I have is a LILYGO T-Dongle S3.
I have built at f4ff46bf08042b747f7d64e2ab5b638b4b48850c and uploaded using PlatformIO CLI with
```
$ pio run -t upload
```
Output:
Processing …
-
I'm not entirely sure whether this is a Prismatik issue, but about 10 contiguous leds are not turning off. Otherwise they behave normally, reacting to color, but they don't go off.
-
Hello from [smart-leds-rs](https://github.com/smart-leds-rs). We're doing a bunch of work on RGB LEDs (ws2812/apa102/et al) for microcontrollers, and evaluating using your crate for our RGB type. One …
-
Hello,
I get an error using FastLED with an Arduino Nano Every. I'm using version 3.7.0. Even when switching back to 3.6.0, I get the same error. I use it in combination with Arduino IDE 2.3.2. Here'…
-
### What happened?
I have two WLED ESP32 systems each controlling two LED strips each. I use one as a master. On 0.14.0, presets can turn on and off segments 0 and 1 independently and sync to the oth…
-
## [HowTo] Install Fan SHIM on Manjaro ARM
Instructions how to install Fan SHIM, with **_no code_** changes (tested on KDE):
- Install `python-configparser` (5.0.0-1)
- Install latest Fan SHIM…