-
There is a new board version TTGo T-Beam V1.0 which is not supported by this repository because:
- GPS Pins changed
- A Programmable power supply was added (AXP192) which has to be told to turn on t…
EccoB updated
4 years ago
-
I have a setup consisting of a Dragino LoRa HAT on a Raspberry PI 3b+, and two Arudino MKR WAN 1300 devices. After installing and running the dual_chan_pkt_fwd software, the gateway was successfully r…
-
Found this error when complie.
C:\Users\sx\Documents\Arduino2\libraries\arduinoWebSockets-master\src\WebSocketsClient.cpp: In member function 'void WebSocketsClient::loop()':
C:\Users\sx\Documents\A…
-
Is there a plan to implement this erratum? I suspect this makes the receiver sensitive to non-LoRa signals as interference, especially in the narrower bandwidths.
![image](https://user-images.githu…
-
Hi I want to send some data using a Heltec WiFi LoRa 32 V2.
I follow the guide in:
https://docs.helium.com/use-the-network/devices/development/heltec/wifi-lora-32-v2/arduino/
I have a hotspot…
-
// French below
Hello,
I am trying to use your module to establish a connection using Lora. However, your documentation is very cryptic to me. How are you supposed to set all the keys ? Using ar…
Fofeu updated
3 years ago
-
Hi
Is it working ?
SPI1.begin();
-
I'm not having much luck getting session save/restore to work.
Multiple examples show that you need to implement NetSaveSessionInfo/NetSaveSessionState/NetGetSessionState.
Based on issue #165 I …
-
#### Remove undesirable dependency '#define LMIC_ENABLE_onEvent 0' for LMIC_registerEventCb()
Documentation for
>**2.3.4** void **onEvent(ev_t ev)
Advises _('in any case is better')_ not to u…
-
hello,
Im trying to use Maduino Lora Radio [(915M)](https://www.makerfabs.com/maduino-lora-radio-433m-868m-915m.html) with chripStack and mikrotik WAP LoRa9 gateway ,us 915 sub1 and I’m facing a few …