-
Hey y'all.
My first Bitaxe (202 Board) has booted up the first time and it works great!
Now:
I wanted to do some stuff with the API. (Seems like it has some?)
But I couldn't find any documentati…
-
Is there any difference between this BM1366AL and the one without AL?
-
Hello,
I have my Bitaxe made by PcbWay. But it seems not to be working:
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x15 (USB_UART_CHIP_RESET),boot:0x28 (SPI_FAST_FLASH_BOOT)
Saved PC:0x40…
-
1. Rename "ASIC **_Voltage_** Requested" to "ASIC **_Current_** Requested"
2. Add new meter for Fan RPM, or add RPM reading under Fan %.
3. Fan % is always at 88% while I can hear the fan speed …
-
Hey,
i had a Bitaxe running with v2.0.7 for quite a while now. Everything was fine.
After updating to 2.1.0 and 2.1.1, I can't see the logs anymore.
When opening the browsers console (tested with…
-
Hi all,
I recently got a BitAxe Ultra Miner (Version 201) - although I feel little cheated as seller did not mention it be a 201 version, does worry me that 201 versions may not be 100percent stab…
-
Hi Skot. Way too remarkable to fit into accurate wordings about what I think of your project, and so I'll skip that part!
I'm going to press-on and go all-in this one. Getting ready to order the co…
-
Request: Would it be possible to add jlcpcb dot com's BOM file please.
There is a Sample Template they would expect the format to be in, on this page if that helps..
https://jlcpcb.com/help/articl…
-
Hi, suddenly the Bitaxe always returning Nonce Difficulty 0.00, I have replaced a new BM1366AL chip, but still facing the same issue, RX Job ID is always 40, and nonce difficulty is always 0.00.... An…
-
Hi to all
i have a bitaxe 1397 miner, software 2.0.4, Wifi conection is ok all the time, when i launch the miner everything is ok, but after about one hours or a little more, i have to restart the …