-
dp_service may crash when iperf3 sends/receives not offloaded traffic greater than 7 Gbits.
This is due to a bug in dpdk mellanox driver documented here:
https://bugs.dpdk.org/show_bug.cgi?id=334
…
-
但是如果两个机器的ip是互通的，我指定另一台机器的一个ip为gateway，
但是出现了Error: bad gateway. dperf cannot find gateway's MAC address. Please check the link.
这是什么原因?
理论上如果两个机器本身可以通信，那如果解析不到mac的原因是？
-
Add support for Smart-NIC which is a NIC with an embedded CPU e.g Mellanox BlueField 2 DPU [1]
Link for design proposal [2]. if required we would be happy to explain use-case/design in the bi-weekl…
-
MLNX_OFED_LINUX-5.8-1.1.2.1 (OFED-5.8-1.1.2)
Ubuntu 20.04
Command: ./autogen.sh && ./configure CUDA_H_PATH=/usr/local/cuda/include/cuda.h && make -j
Error message:
root@node001:/home/frank/pe…
-
From @msdisme :+1:
what is the form factor of those DPUs (PCIe x1, x4, x8, x16, x32?, v3 or v4?) Thickness of the card too, is it going to take more than 1 slot for cooling? Talking about cooling, a…
-
### Which *exact* Umbraco version are you using? For example: 9.0.1 - don't just write v9
9.5.2
### Bug summary
Hello,
I imagine someone has already flagged this. But when you are adding custom …
-
Hi,
Thank you for your clear instructions in compiling Caladan! I'm trying to compile and run Caladan on the XL170 machines in CloudLab (running Ubuntu 18.04.6 LTS, kernel 4.15.0-191-generic) . All…
-
以下是我机器上的网卡信息
当我使用dperf启动server端时，如果我指定的是ConnectX5卡，可以正常启动
但如果指定BlueField2卡，无法启动，报错如下
请问，是因为dperf不支持吗？
-
Hi, Kim, I'm trying to follow your work and met some problems when performing the step 9.3
### setup
I am trying to set up a cluster with 3 nodes.
and I got a segmentation fault
``` (core dumped) …
-
In our bicep script we are creating 3 key-vaults and 1 application-insights resources in a resource-group. We run what-if command (as shown below) with "Complete" mode as a parameter before deploying …