-
How is the Bluetooth behaviour of ESP32 if no device found or connected .
Is it right that if no Bluetti device is found or not connected that we have to wait until new reboot is automatically initia…
-
Add the ANT-BMS communication to the driver.
- [x] SOC
- [x] Battery voltage
- [x] Charge/discharge current
- [x] Temprature
- [x] Min/max cell voltages
- [x] protection notifications
-
Can you please write an instruction to flash ESP32 board from ESP Home?
Because people who doesn't work with arduino before have a huge problems...
I have an error in PIO when try to flash
$ esp…
-
hi, i cant compile the code.
i would like to use it with an ESP32 board with CP2102 for my AC200MAX.
I always get the following error:
`Bluetti_ESP32\BTooth.cpp: In function 'bool connectToServ…
-
### Describe the bug
Situation:
I have two battery systems:
- Battery 1 -> RCT Power -> configured by Template
- Battery 2 -> custom configured
Due to the fact that the RCT Power Battery …
-
I recently added some bluetooth proxies to home assistant via the esphome integration (https://esphome.github.io/bluetooth-proxies/). I was hoping that this integration could use the proxies to increa…
-
Hi,
I'm trying to get it running for a EB3A.
- First question, is it right that the specific DEVICE_EB3A.h (https://github.com/mariolukas/Bluetti_ESP32_Bridge/blob/main/Bluetti_ESP32/DEVICE_EB3A.h…
-
Contrary to the description, the status of dc/ac_output_on cannot be queried.
MQTT Explorer does not show me any values. ( I use Bluetti AC200M )
state
device_type = AC200M
serial_number = xxxx…
-
I have installed bluetti_mqtt in ubuntu virtual machine on a Intel NUC in vmware ESXi. After succesfull install the command --scan get an error:
`
~/.local/bin$ ./bluetti-mqtt --scan
Scanning....
…
-
Hello.
Have no luck with my ac200max. Any help would be appreciated.
Serial console:
*wm:AutoConnect
*wm:Connecting to SAVED AP: bear_n_iot
*wm:connectTimeout not set, ESP waitForConnectRes…