-
Podczas stanu uśpienia nie wyłącza się wiatrak SPS30 Sensirion. Podobnie jest między pomiarami. Niepotrzebnie się kręci, wzrasta zużycie energii. Bardzo dokładnie wyjaśnia obsługę LOW POWER nota produ…
-
Enviro pHAT builds in old, clunky versions of the ads1015, bmpe280 and lsm303d drivers which all have new versions (for Breakout Garden):
* https://github.com/pimoroni/lsm303d-python
* https://git…
-
Hi,
Thanks for writing a ROS node for the EM7190.
Do you have a wiring diagram to connect it to the RPi? Or a picture. If it is new do you need to install anything before running the node?
…
-
# Overview
We need to define how we will transmit the data. Since the device is for emergency uses and we need to optimize the battery, there are several proposals.
- Via bluetooth
- Via radi…
-
Hi,
II have several BME280's that stopped working and gave error below.
```
Could not find a valid BME280 sensor. Check wiring, address, and sensor ID.
SensorID is: 0x255
0xFF: is a BMP180 …
-
Hi there,
Thank you for your work and effort you put into this projects. It's just awesome. I am running it with a SDS011, a BMP280 and a HTU21D. It's running stable since a looong time.
Now I ran…
-
1. Stratux version:
2. Stratux config:
SDR
- [ ] single
- [ X] dual
GPS
- [X ] yes
- [ ] no
type:
AHRS
- [ ] yes
- [X ] no
…
-
Hi,
In the past few weeks of development, I've run into a very tricky problem. Since the Crazyflie 2.1 flight control board is weak in terms of arithmetic and memory, our work hopes to make some o…
-
Hi Keith! Thanks for this library. Any chance of making it freely available for use with an MIT licence?
-
Código utilizado no desenvolvimento de uma estação de baixo custo, para aferir a temperatura, umidade e pressão atmosférica. Projeto aplicado da disciplina de Instrumentação Eletrônica - USF Campus Sw…