-
## What happened
Home Assistant is not discovering the light entity for my unsupported device in my [external converter](https://pastebin.com/h4SNrGAK). I am trying to expose an RGB light, a…
-
## What happened
OTA update for ZNCLDJ12LM (Aqara B1 curtain motor) is not working. I get "Failed to check if update available for 'Curtain' (Cannot read property 'ID' of undefined)", the s…
-
Hi
In Z-Stack-firmware/coordinator/Z-Stack_3.x.0/COMPILE.md there are 3 different ccs projects to select
- `znp_CC26X2R1_LAUNCHXL_tirtos_css`
- `znp_CC1352P_2_LAUNCHXL_tirtos_css`
- …
-
## What happened
Ikea Fyrtur cover position is often not reported, if controlled via open_cover or close_cover.
The position is correctly published, if the position is set.
The position will be…
-
### What happened?
Since updating to 1.25.0 my Z2M container keeps crashing after a few hours with the following displayed in the logs.
Error: SREQ '--> ZDO - extRouteDisc - {"dstAddr":17327,"opti…
-
### What happened?
I decided to update to 1.28.0 and addon would not start.
I did this twice.
Somewhere along the log searching, i saw something like "_zigbee2mqtt/json: Not Found ("No such con…
-
## What happened
**Steps**
- Get Mosquitto MQTT and setup integration using auto discovery
- Get Z2m add-on and configure it to use core-mosquitto and pick zzh! with latest firmware
- Start everyt…
-
### What happened?
Hi, I have seen this device and it seems very interesting, but I need to know if there is a way to configure the type of AACC so that it sends the correct ir commands, there is s…
-
## What happened
Trying to update a Gledopto GL-B-008P but Zigbee2mqtt reports that the “device did not request any image blocks.” The update seems to be in the database so I’m but sure why…
-
Hi,
i am seeking help as i am running out of ideas. I ordered two zzh and i am unable to flash the koenk firmware to either of them. I tried several procedurs, including flashing a blink.bin to the…